[time-nuts] (no subject)

[Javier Herrero]

Hello,


Yes, this is a micro-D 9 pin female, usually quite expensive although 
for 9-pin, there are some lower-cost parts available: 
https://www.digikey.es/product-detail/es/norcomp-inc/380-009-113L001/NOR1142-ND/2798595 
shall mate the one in the oscillator


Best regards,


Javier, EA1CRB


On 12/5/20 19:22, Bruce Hunter via time-nuts wrote:
> Attached are a couple of pictures of these curious oscillators.  As there are no mounting holes to secure these, I assume they were held in a clamping arrangement.There appears to be a threaded thermometer well in the front and a frequency adjustment in the rear under a cap screw.
> The power/control connectors turns out to be a Micro-D type -- a rather expensive connector.I have been able to remove the cover; however, the interior is potted, thus concealing its contents
> Bruce, KG6OJI
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.

-- 
---------------------------------------------------------------------------------
Javier Herrero
Chief Technology Officer                           EMAIL: jherrero at hvsistemas.com
HV Sistemas S.L.                                   PHONE:         +34 949 336 806
Teide 4, Núcleo 1 Of. 0.1                          FAX:           +34 949 336 792
28703 San Sebastián de los Reyes - Madrid - Spain  WEB: http://www.hvsistemas.com