[time-nuts] Vectron MC2003X4-001W Oscillator

[jimlux]

On 5/12/20 10:18 AM, paul swed wrote:
> OK its a reverse mini 9 pin. It will be expensive I suspect as its mil.
> Or just find some pins stick them in with wires for temp.

Is it a MicroD? There are some inexpensive plastic connectors that are 
compatible (I can't remember the part number, but if they are MicroD, 
I'll track it down). You might check Omnetics, too.



> If the cover can be removed potentially much more insight can be gained.
> Given at this point they are worthless. No harm or foul in diving in.
> Potentially you can at least find ground on the pins.
> Regards
> Paul
> WB8TSL
> 
> On Tue, May 12, 2020 at 1:04 PM <brucekareen at aol.com> wrote:
> 
>> Here are a couple of pictures of these curious oscillators.  There appears
>> to be a threaded thermometer well in the front and a frequency adjustment
>> in the rear under a cap screw.  As there are no mounting holes to secure
>> these, I assume they were held in a clamping arrangement.
>>
>> Bruce, KG6OJI
>>
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
>