[time-nuts] OCXO Support Board

[Tom Van Baak]

Bert,

I found them. You posted the Gerber files as file OCXO.pcb-1.zip on 
5-Nov-2018 here:

http://lists.febo.com/pipermail/time-nuts_lists.febo.com/2018-November/094597.html

http://lists.febo.com/pipermail/time-nuts_lists.febo.com/2018-November/094598.html

/tvb


On 5/13/2020 5:34 AM, ew via time-nuts wrote:
> A year ago I posted the two boards with Gerber File since no one was willing to make and sell. If there is still interest I will post Gerber file again have to look for it
> Bert Kehren
>
>
> In a message dated 5/13/2020 7:40:49 AM Eastern Standard Time, notfaded1 at gmail.com writes:
>
> I've been trying to find a base PCB design to use too.  In the interim I
> bought some boards from Gerry Sweeney that sells them for HP5313x frequency
> counter OCXO upgrades and supports different footprints.  Open source
> design is even better.  OSHpark is great.  Please post it!
>
> Bill E.
>
>
> On Tue, May 12, 2020, 11:59 PM Matthias Welwarsky <time-nuts at welwarsky.de>
> wrote:
>
>> On Dienstag, 12. Mai 2020 20:53:25 CEST Gerhard Hoffmann wrote:
>>
>>> Ten boards did cost $5 at PCBway, DHL wanted $25 for transport. :-<
>>> I can publish the Altium Designer project or the Gerber files when the
>>> 1st ten are used up
>>> and there has been somewhat more testing. The number of possible
>>> combinations
>>> is quite large.
>> If you publish the Gerber files, People in the US can use OSHPark for
>> having
>> the boards made, in EU Aisler.net is probably the best option.
>>
>> BR,
>> Matthias
>>
>>> Cheers, Gerhard
>>>
>>> Am 12.05.20 um 19:52 schrieb Wes:
>>>> Does anyone know of a ready made board that will allow me to mount and
>>>> at the least, minimally support the operation of an MV89A oscillator.
>>>> I have one which I've powered up deadbug style and would like to clean
>>>> up the mess a little.
>>>>
>>>> Thanks
>>>>
>>>> Wes N7WS
>>>>
>>>>
>>>> _______________________________________________
>>>> time-nuts mailing list -- time-nuts at lists.febo.com
>>>> To unsubscribe, go to
>>>> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
>>>> and follow the instructions there.
>>
>>
>>
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at lists.febo.com
>> To unsubscribe, go to
>> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
>> and follow the instructions there.
>>
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.