[time-nuts] Lucent RFTGm-II-XO / Lucent RFTGm-II-Rb / NT BW50AA

Bob kb8tq kb8tq at n1k.org
Wed Feb 13 02:15:09 UTC 2019


Hi

You have a *ton* of digital this and that all on a common ground with the RF output. 
The original specs didn’t sweat the spurs so the designs are what they are. The OCXO’s 
are down in the -130 dbc/Hz range at 10 Hz offset. The Rb’s ten’s of db worse. Nobody
seemed to mind ….

If you go back about 10 years in the archives, you can find a lot of the data on these parts.

Bob

> On Feb 12, 2019, at 8:58 PM, Hal Murray <hmurray at megapathdsl.net> wrote:
> 
> 
> kb8tq at n1k.org said:
>> None of the GPSDO’s out there are great for multiplying direct to microwaves.
>> It’s not so much the phase noise as all the spurs (though phase noise does
>> vary a bit).
> 
> Where do the spurs come from?
> 
> 
> 
> 
> -- 
> These are my opinions.  I hate spam.
> 
> 
> 
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.





More information about the Time-nuts_lists.febo.com mailing list