[time-nuts] Lucent RFTGm-II-XO / Lucent RFTGm-II-Rb / NT BW50AA
jimlux
jimlux at earthlink.net
Wed Feb 13 03:34:55 UTC 2019
On 2/12/19 4:41 PM, Jeff Blaine wrote:
> OK. I would still be interested to see if anyone has plots on the close
> in noise profile of the Lucents. The XO part has an Efrom OCXO and I
> can assume it's similar to a generic OCXO. But the RB is an unknown - I
> have no idea what to expect from that.
>
> On a separate task, one of these days I would like to build up a set of
> 125 & 500 Mhz sources for lab and gear use disciplined by a GPSDO 10Mhz
> feed. The current source is a 125 Mhz homebrew OCXO and a pair of
> doubler/amp/filter sets. I assume they are pretty clean close in but
> the frequency moves around a bit more than I would like as the OCXO part
> of the equation is nothing special. They drive some SDR and DDS sig
> gens here in the shack so the PN is a factor as well as the frequency
> accuracy.
>
what about disciplining the 125 MHz OCXO?
or a really narrow PLL?
More information about the Time-nuts_lists.febo.com
mailing list