[time-nuts] GN-GGB0710 GPS Antenna Mounting Thread
Bruce Griffiths
bruce.griffiths at xtra.co.nz
Fri Feb 22 23:36:48 UTC 2019
3/8" (nominal bore) NPT thread has an outer diameter near 5/8" and has 18 threads/inch somewhat finer than the 5/8 11 TPI used for most surveying antennae
Bruce
> On 23 February 2019 at 11:06 David Witten <wittend at wwrinc.com> wrote:
>
>
> FWIW
>
> I just poked around my shop and found something that fit perfectly. It was
> a 5/8 inch plumbing 'barb'. So I just went to to a big-box hardware store
> (Lowes) and went to the plumbing section. The sales person agreed with me
> that it seemed to be tapered and I found a nice 8 inch length of brass
> extension threaded on both ends. It fit snugly and seems well suited for
> attachment to a larger pole using a couple of hose clamps.
>
> Dave Witten
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list