[time-nuts] GN-GGB0710 GNSS Antenna

[Bob kb8tq]

Hi

If you dig into the postings on the 710 antenna via Google Translate, it appears that there was a change
in the threads over the last couple of months. A number of people have noticed it. 

Bob

> On Feb 25, 2019, at 5:01 PM, Ben Hall <kd5byb at gmail.com> wrote:
> 
> On 2/24/2019 7:01 PM, djl wrote:
>> Probably tapped for 1/2" pipe thread.
> 
> Hi Don,
> 
> I don't think so - the threads were much too coarse.  1/2" NPT is 14 threads per inch.  My 5/8-11 tap went in quite easily and didn't cut new threads, just deepened up the original threads...
> 
> thanks,
> ben
> 
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.