[time-nuts] Connector help?

[Tom Knox]

Hi Martin;
The ones I have seen use an SMB.
Cheers;

Tom Knox

"Peace is not the absence of violence, but the presence of Justice" Both MLK and Albert Einstein

________________________________
From: time-nuts <time-nuts-bounces at lists.febo.com> on behalf of Bob kb8tq <kb8tq at n1k.org>
Sent: Sunday, January 27, 2019 3:17 PM
To: martin.flynn at compdecon.org; Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] Connector help?

Hi

Yes I know, this is beating a dead horse …..

Since the HP splitter will knock out everything that is not right on top of GPS, are you
sure you want to go that route? Yes it does depend a bit on the antenna. If it’s one of
the telecom / narrowband gizmos then the splitter will not have much affect.

I tend fo find that in a lab setting as broadband a feed as possible is a really good idea.
You never really know what will pop up on the bench next.

Bob

> On Jan 27, 2019, at 4:17 PM, Martin Flynn <martin.flynn at compdecon.org> wrote:
>
> Planning deployment of an HP 58516A GPS 1x4 antenna splitter with the  external power option (option 05Q)  at our makerspace.
>
> Anyone know what the mating DC connector is?
>
> martin
>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.


_______________________________________________
time-nuts mailing list -- time-nuts at lists.febo.com
To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.