[time-nuts] Lady Heather running on a Raspberry Pi

[mpb45 at clanbaker.org]

Time Nutters--

A friend set up a Raspberry Pi (R-Pi) for me to run Lady Heather.
It runs 24/7 and is viewed on a small (12" diagonal) monitor
sitting on a shelf over my workbench.  Living out here in the
boon-docks our grid power has frequent interruptions.   I am
running both the Trimble unit and the Raspberry-Pi on a
small UPS back-up pure sinewave power supply.

However, after a prolonged grid power loss interval the LH
software re-boots itself and displays the Lady Heather screen
there is an issue: It is that when the R-Pi does an automatic
re-boot the LH display screen is around 1/4 of the monitor
screen's size.

No big deal as all I have to do is to drag the lower right corner
of the LH display out to the corner of the screen.

I have not found how to get LH to reboot itself and have a
full size, corner-to-corner display.  I have not found anything
in the LH manual that corrects the display size on boot-up.

Any suggestions will be much appreciated!!!

Mike Baker  WA4HFR
Micanopy, FL  USA
******************************