[time-nuts] Looking for information on Brightline oscillator

[Skip Withrow]

Hello Time-Nuts,
OK, have one for the old timers out there.  Does anyone have pinout or
voltage input information on a Brightline oscillator?  This company
was founded by Charles S. Stone in Cedar Park, TX.  His company was
soon purchased by Frequency Electronics and he went to work for them.

The oscillators in question (I have a 10MHz and a 100MHz) are 1980's
vintage and the base looks exactly the same on both of them.  There is
a 9-pin (tube socket) connector, plus two SMA connectors (I believe
one is output and the other EFC).  There are red and black wires
connected to the units so I think I know the basic Gnd and Supply
pins.  However, I don't know the supply voltage, or what any of the
other pins might be used for.

As always, all help appreciated.  Thanks in advance.

Skip Withrow