[time-nuts] Austron 2110 schematics?

[Tom Knox]

Hi Jim;
These are encapsulated blocks two 48>5 and one 48>24 -  I know the 24  is made by Victor. Pretty easy to replace.
I up-dated my 2110 with a high contrast LED backlite display. Easy to do when you have it apart.
Cheers;

Tom Knox

SR Test and Measurement Engineer

Ascent Concepts and Technology

4475 Whitney Place

Boulder Colorado 80305

303-554-0307

actast at hotmail.com

"Peace is not the absence of violence, but the presence of Justice" Both MLK and Albert Einstein

________________________________
From: time-nuts <time-nuts-bounces at lists.febo.com> on behalf of Tom Van Baak <tvb at LeapSecond.com>
Sent: Sunday, July 5, 2020 3:33 PM
To: time-nuts at lists.febo.com <time-nuts at lists.febo.com>
Subject: Re: [time-nuts] Austron 2110 schematics?

Jim,

For the power supply see: http://leapsecond.com/museum/au2110b/ps.htm

Let me know if you need more pages from the manual.

For sample LCD readings see: http://leapsecond.com/museum/au2110b/lcd.htm

/tvb


On 7/5/2020 1:34 PM, AC0XU (Jim) wrote:
> Time Nuts-
>
> I have an Austron 2110 with a severely toasted power controller board. Probably not repairable. I plan to build a substitute with a more modern design.
>
> Does anyway have schematics?  I noticed correspondence between Magnus Danielson and Harald Hauglin some years ago. Did the manula or schematics ever get posted?
>
> Thanks in advance-
> Jim
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
>


_______________________________________________
time-nuts mailing list -- time-nuts at lists.febo.com
To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.