[time-nuts] 3D printed tourbillon clock
Tom Van Baak
tvb at LeapSecond.com
Sat Jul 25 18:42:19 UTC 2020
> I’m guessing a couple hundred hours to print the parts and maybe the same
> sort of time to clean them all / fit them together …..
Bob,
Good guess. The video comments say 110 hours print time. Full details below.
BTW, even if you don't watch the video, the 22 MB
"Tourbillon_Mechanica_Assembly_Guide.pdf" file is worth downloading and
admiring. The direct google drive link is below.
Now if we could just 3D print a OCXO, Rb, or Cs standard we'd have as
much fun as the mechanical clock guys. ;-)
/tvb
-----
> https://www.youtube.com/watch?v=E9prY3ky6Bo
>
> Cool 3D Printed Mechanical Clock | Tourbillon Mechanica (FDM Version)
Assembly Guide
> 101,691 views Jul 13, 2020
>
> Dan.T
> 8.52K subscribers
>
> This is the FDM version of the Tourbillion Mechanica that is modified
to optimise
> printability and assembly on a FDM printer. These was printed on the
standard Ender 3.
>
> Detailed step by step assembly and printing guide can be downloaded here:
>
> https://drive.google.com/file/d/1JZ_KSSja-Vo8brJ3yLqM_bRg7YPXFP6R/view
>
> Link to STL files:
>
>
https://www.myminifactory.com/object/3d-print-tourbillon-mechanica-tourbillon-escapement-mechanical-clock-assembly-guide-pdf-in-description-124938
>
> Approximate run-time on PETG spring: 10 minutes
> Total Print Time: 110 hours
> Material Consumption: 350 grams
>
> More details can be found in the detailed pdf guide!
-----
On 7/25/2020 8:22 AM, Bob kb8tq wrote:
> Hi
>
> Very cool !!
>
> I’m guessing a couple hundred hours to print the parts and maybe the same
> sort of time to clean them all / fit them together …..
>
> Bob
>
>> On Jul 25, 2020, at 2:40 AM, Mark Sims <holrum at hotmail.com> wrote:
>>
>> https://www.youtube.com/watch?v=E9prY3ky6Bo
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at lists.febo.com
>> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
>> and follow the instructions there.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list