[time-nuts] 3D printed tourbillon clock
djl
djl at montana.com
Sat Jul 25 19:49:26 UTC 2020
Ummm-- I watched the video. Start to finish. I noticed in many places
hand movements reminiscent of those I practiced many times in front of a
mirror. There is nothing up my sleeve...
Wonder how long plastic springs hold up?
Don
On 2020-07-25 12:42, Tom Van Baak wrote:
>> I’m guessing a couple hundred hours to print the parts and maybe the
>> same
>> sort of time to clean them all / fit them together …..
>
> Bob,
>
> Good guess. The video comments say 110 hours print time. Full details
> below.
>
> BTW, even if you don't watch the video, the 22 MB
> "Tourbillon_Mechanica_Assembly_Guide.pdf" file is worth downloading
> and admiring. The direct google drive link is below.
>
> Now if we could just 3D print a OCXO, Rb, or Cs standard we'd have as
> much fun as the mechanical clock guys. ;-)
>
> /tvb
>
> -----
>
>> https://www.youtube.com/watch?v=E9prY3ky6Bo
>>
>> Cool 3D Printed Mechanical Clock | Tourbillon Mechanica (FDM Version)
>> Assembly Guide
>> 101,691 views Jul 13, 2020
>>
>> Dan.T
>> 8.52K subscribers
>>
>> This is the FDM version of the Tourbillion Mechanica that is modified
>> to optimise
>> printability and assembly on a FDM printer. These was printed on the
>> standard Ender 3.
>>
>> Detailed step by step assembly and printing guide can be downloaded
>> here:
>>
>> https://drive.google.com/file/d/1JZ_KSSja-Vo8brJ3yLqM_bRg7YPXFP6R/view
>>
>> Link to STL files:
>>
>> https://www.myminifactory.com/object/3d-print-tourbillon-mechanica-tourbillon-escapement-mechanical-clock-assembly-guide-pdf-in-description-124938
>>
>> Approximate run-time on PETG spring: 10 minutes
>> Total Print Time: 110 hours
>> Material Consumption: 350 grams
>>
>> More details can be found in the detailed pdf guide!
> -----
>
>
> On 7/25/2020 8:22 AM, Bob kb8tq wrote:
>> Hi
>>
>> Very cool !!
>>
>> I’m guessing a couple hundred hours to print the parts and maybe the
>> same
>> sort of time to clean them all / fit them together …..
>>
>> Bob
>>
>>> On Jul 25, 2020, at 2:40 AM, Mark Sims <holrum at hotmail.com> wrote:
>>>
>>> https://www.youtube.com/watch?v=E9prY3ky6Bo
>>> _______________________________________________
>>> time-nuts mailing list -- time-nuts at lists.febo.com
>>> To unsubscribe, go to
>>> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
>>> and follow the instructions there.
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at lists.febo.com
>> To unsubscribe, go to
>> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
>> and follow the instructions there.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to
> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
--
Dr. Don Latham AJ7LL
PO Box 404, Frenchtown, MT, 59834
VOX: 406-626-4304
More information about the Time-nuts_lists.febo.com
mailing list