[time-nuts] ThunderBolt question

[Bob kb8tq]

Hi

Their engineering group also backs up this statement if you ask them about
it face to face. The answer that comes back is: “We ran a bunch of tests with 
75 and 50 ohm cable, we could see no difference in the results”. 

Bob

> On Jun 6, 2020, at 1:30 PM, Taka Kamiya via time-nuts <time-nuts at lists.febo.com> wrote:
> 
> In case of thunderbolt, the manufacturer openly recommends use of 75 ohm cable.  The manufacturer openly states not to be concerned with a mismatch.  They are in manuals.  
> 
> 
> --------------------------------------- 
> (Mr.) Taka Kamiya
> KB4EMF / ex JF2DKG
> 
> 
> 
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.