[time-nuts] Frequency Counter Choice
Bob kb8tq
kb8tq at n1k.org
Fri Oct 23 00:07:37 UTC 2020
Hi
…. and now I have a copy :)
Bob
> On Oct 22, 2020, at 6:12 PM, Attila Kinali <attila at kinali.ch> wrote:
>
> On Thu, 22 Oct 2020 13:29:07 -0400
> Bob kb8tq <kb8tq at n1k.org> wrote:
>
>> There is a paper running around behind the IEEE paywall by Collins that details
>> one approach to designing multi-stage limiters. There are other ways to do it.
>> The key is to not go to crazy all in one stage.
>
> <self-advertisment>
> You can find a modern, more accurate version of Collins result
> in [1]. While most formulas in there give the noise up to some
> proportionality factor, all the information to calculate the noise
> level is in there. The big difference to Collins here is that this
> result is exact if you use all harmonics up to infinity (which is
> easy) or can break up with a known error if you don't want to go
> that far. Collins uses a trapezoid approximation throughout and thus
> over-estimates the noise contribution of low-gain stages, which
> are the first stages thus contribute to a relatively large error
> in the calculation.
> </self-advertisment>
>
>
> Attila Kinali
>
> [1] "A Physical Sine-to-Square Converter Noise Model"
> by yours truly, IFCS 2018
> http://people.mpi-inf.mpg.de/~adogan/pubs/IFCS2018_comparator_noise.pdf
>
> --
> <JaberWorky> The bad part of Zurich is where the degenerates
> throw DARK chocolate at you.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list