[time-nuts] 5065A Rb Cavity RX - Varactor repair

[cdelect at juno.com]

If the unit fails again just diconnect the 60Mhz output jack from A3 and
Ohm from the center pin to shield on the cables connector with a
semiconductor setting on the DVM. 
Try both directions as the diode can be installed either way.
If you can "see" the diode that way it is most certainly good.
If not the there are 3 SMC connectors in the route inside the cavity end.
Check those for tightness.
The diode is NOT easily accessible although the whole cell assy screws
out easily.

Cheers,

Corby