[time-nuts] LPRO 101 heat sink question

[Dana Whitlow]

That's what I did with my LPRO, and it seems to be happy- I've been using
it for a
couple of years now with no apparent difficulty.

Dana


On Thu, Sep 10, 2020 at 9:29 AM Jim Harman <j99harman at gmail.com> wrote:

> I recently purchased an LPRO rubidium from the auction site. The mounting
> surface is covered with a thin soft, dry light blue material with a sheet
> of brownish plastic film underneath. I assume this is the remains of an
> adhesive thermal pad.
>
> Should I peel this off and expose the bare metal mounting surface before
> attaching the LPRO to an appropriate heat sink? After removing the pad, can
> I use ordinary thermal grease between the LPRO and the heat sink?
>
> Thanks for any advice.
>
> --
>
> --Jim Harman
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to
> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
>