[time-nuts] New member, new old 4040A with PSU failure

[paul swed]

Pat
I am familiar with the fts4050. Please send me a pix of what you are
looking at. Best to do this offline.
Thanks Paul.

On Fri, Sep 25, 2020 at 10:46 PM Patrick Tanner <tannerpa at gmail.com> wrote:

> Hi folks.
>
> I'm new to the board, my name is Patrick. I'm a career RF/systems engineer.
> Greetings all around!
>
> I just made a couple of 'good' handyman special buys on the worlds largest
> auction. I got a PRS10 that needed a new SA612A mixer that I got working,
> so, happy about that. Thanks to KO4BB for having the schematics.
>
> I also picked up a FTS4040A, apparently with a failed PSU. Its labelled
> 'high voltage' , but the dinky 24? 26? Ga output leads (red/black 3x
> ganged) don't led me to believe that there' s 2.2kV here. Can any one shed
> some light on what this PSUs output is? I'm hoping that I can either fix or
> replace it and find a diamond here.
>
> Thanks for your help.
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to
> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
>