No subject

OCXO59 series oscillator which includes a drawing for the 59 series with a
pinout:

http://www.isotemp.com/wp-content/uploads/2011/06/Legacy59-21.pdf

On Thu, Aug 19, 2021 at 3:56 PM Robert DiRosario <ka3zyx at comcast.net> wrote:

> I got a  Trak Systems "Time Code Translator" from ebay.  It's a 1U box
> with large LEDs for DOY and H/M/S that translates IRIG-A to NASA-36 time
> code.  I plan on using the case for my WWVB clock.
>
> Unexpectedly it has an Isotemp OCXO in it, model OCXO59-11-2, frequency
> marked as 1.000 MHz  The Isotemp website is more or less dead, it has no
> information on it.  Does anyone have any information on this model, like
> how accurate it is?  It has only three wires, which I assume are power,
> ground and output, with no EFC input.
>
> One thing that I'm sill note sure about is what to do when the receiver
> is not receiving WWVB.  I was thinking of using something like the
> DS3231 RTC module.  If this OCXO is better, I may use it.
>
> Thanks
>
> Robert
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com -- To unsubscribe send
> an email to time-nuts-leave at lists.febo.com
> To unsubscribe, go to and follow the instructions there.
>