[time-nuts] Re: General Radio 1105-A Frequency Measuring Equipment, parts wanted.
Robert LaJeunesse
lajeunesse at mail.com
Mon Aug 23 14:21:08 UTC 2021
The mains connector proper is readily available:
https://www.ebay.com/itm/201639994813?chn=ps
But the snap-on metal backshell is less available:
https://www.etsy.com/listing/622498888/backshell-for-amphenol-78-and-86
-series
Shown here with back clamp:
https://www.etsy.com/listing/621285791/back-shell-for-amphenol-78-serie
s
Also here "Amphenol Metal Backshell":
https://www.surplussales.com/Tube-Sockets/TubeSkts-3.html
Bob L.
> Sent: Monday, August 23, 2021 at 9:15 AM
> From: "Stijn" <pe1rks at xs4all.nl>
> To: time-nuts at lists.febo.com
> Subject: [time-nuts] Re: General Radio 1105-A Frequency Measuring
Equipment, parts wanted.
>
> Seems that the pictures got scrubbed:
>
> Links:
>
> The equipment I am working on:
> [1]https://www.pe1rks.nl/plaatjes/GR_1105A/IMG_0030.JPG
>
> The GR 774 connectors that I am after:
> [2]https://www.pe1rks.nl/plaatjes/GR_1105A/IMG_0115.JPG
>
> The mains connectors that I am looking for need to fit these:
> [3]https://www.pe1rks.nl/plaatjes/GR_1105A/IMG_0116.JPG
>
> The oscillator module that I would like to replace:
> [4]https://www.pe1rks.nl/plaatjes/GR_1105A/IMG_0013.JPG
>
> Sincerely,
>
> Stijn
>
> Op 23-8-2021 om 15:04 schreef Stijn:
> > Fellow Time-nuts,
> >
> > I have for some time a General Radio 1105-A and I have started to
> > resurrect this two rack Frequency Standard combined with Frequency
> > Measuring Equipment.
> >
> > There are some repairs to be made and some units require some more
in
> > depth restoration, but to be able to complete this task and get all
> > working like it once should I need some parts.
> >
> > What I need are some General Radio 774 connectors, 8 to be exact:
> >
> > I am also in need for 6 of the connectors fitting this mains entry:
> >
> > And the worst part is the Piezo Oscillator, the Quartz bar is there
and
> > in good condition the oven is also working. But the oscillator
circuit
> > has been heavily modified.
> >
> > Instead of the original bridge circuit they have build a totally
> > different oscillator and I can't get this to work.
> >
> >
> > So here are my questions:
> >
> > Does anybody have or know a supplier for the needed connectors?
> >
> > Is there someone out there who has just the Oscillator module for
the
> > Piezo-Electric Oscillator and is willing to sell and ship this?
> >
> > Sincerely,
> >
> >
> > Stijn Nestra
> >
> >
> > _______________________________________________
> > time-nuts mailing list -- time-nuts at lists.febo.com -- To
unsubscribe
> > send an email to time-nuts-leave at lists.febo.com
> > To unsubscribe, go to and follow the instructions there.
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com -- To unsubscribe
send an email to time-nuts-leave at lists.febo.com
> To unsubscribe, go to and follow the instructions there.
>
References
1. https://www.pe1rks.nl/plaatjes/GR_1105A/IMG_0030.JPG
2. https://www.pe1rks.nl/plaatjes/GR_1105A/IMG_0115.JPG
3. https://www.pe1rks.nl/plaatjes/GR_1105A/IMG_0116.JPG
4. https://www.pe1rks.nl/plaatjes/GR_1105A/IMG_0013.JPG
More information about the Time-nuts_lists.febo.com
mailing list