[time-nuts] Re: Query about List and about 10 MHz Distro

[paul swed]

exactly

On Sun, Aug 29, 2021 at 10:45 AM Dana Whitlow <k8yumdoober at gmail.com> wrote:

> Andy,
>
> Balanced twisted pair may be helpful, but only if adequate precautions are
> taken to
> avoid creation of common mode *currents *on the line*.*
>
> Dana
>
>
> On Sun, Aug 29, 2021 at 9:34 AM Andy Talbot <andy.g4jnt at gmail.com> wrote:
>
> > Hence my observation that balanced twisted pair might be a better
> solution
> > than coax for 10MHz distribution
> > Removes all possibility of ground loops
> >
> > Andy
> > www.g4jnt.com
> >
> >
> >
> > On Sun, 29 Aug 2021 at 15:22, Dana Whitlow <k8yumdoober at gmail.com>
> wrote:
> >
> > > I believe that a significant problem in my case was not leakage through
> > the shield,
> > > but
> > > rather common-mode currents on the cable.  My experiences were with
> RG-6
> > style
> > > cable,
> > > namely a cable that mostly went around the outside of the house for TV
> > > distribution.
> > _______________________________________________
> > time-nuts mailing list -- time-nuts at lists.febo.com -- To unsubscribe
> send
> > an email to time-nuts-leave at lists.febo.com
> > To unsubscribe, go to and follow the instructions there.
> >
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com -- To unsubscribe send
> an email to time-nuts-leave at lists.febo.com
> To unsubscribe, go to and follow the instructions there.
>