[time-nuts] Re: HP/Symmetricom 59551A showing wrong date
paul swed
paulswedb at gmail.com
Mon Nov 15 23:31:44 UTC 2021
I was about to delete this but it sparked a thought for the windows worlds
it would seem either 1 or two putty sessions would work the same as Hals
idea for the linux world. Not sure why I would need two sessions. Hal can
you explain please?
Regards
Paul
WB8TSL
On Mon, Nov 15, 2021 at 2:41 PM Hal Murray <halmurray+timenuts at sonic.net>
wrote:
>
> > To ???correct the WNRO??? REQUIRES entering correct date & time, using
> the HP
> > SatStat program, BEFORE the HP 59551A disconnected from Antenna.
>
> You don't need SatStat. (or a Windows environment)
>
> I've done it on Linux with roughly the following recipe:
>
> use stty to setup the serial port parameters
>
> on one window:
> cat /dev/ttyS0
>
> on another window
> echo ":SYSTEM:STATUS?" /dev/ttyS0
>
> I forget the command and format for setting the date. The details are in
> the
> Z3801A manual. (I can't find them in the 59551A manual.)
>
>
> --
> These are my opinions. I hate spam.
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com -- To unsubscribe send
> an email to time-nuts-leave at lists.febo.com
> To unsubscribe, go to and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list