November 2021 Archives by subject
Starting: Mon Nov 1 01:46:32 UTC 2021
Ending: Tue Nov 30 21:04:57 UTC 2021
Messages: 320
- [time-nuts] 0.76 millionths of a trillionth of a percent ...
Jesse Lackey
- [time-nuts] 1 pps
B Riches
- [time-nuts] 5/10MHz Doubler and Distribution
Andy Talbot
- [time-nuts] Assessing performance of a frequency counter
Erik Kaashoek
- [time-nuts] Can ADEV of a frequency source be correctly determined using a continuous time-stamping frequency counter?
Erik Kaashoek
- [time-nuts] Can ADEV of a frequency source be correctly determined using a continuous time-stamping frequency counter?
Lewis Masters
- [time-nuts] crystal types
Eric Scace
- [time-nuts] Deep Space Atomic Clock : Poster
Gregory Beat
- [time-nuts] Efratom MBF 5MHz distrib amp schematics & conversion to 10MHz
Wilko Bulte
- [time-nuts] Efratom MFS modules for sale to a good time-nut home
Wilko Bulte
- [time-nuts] FEI FE-5450A user and service manual
Ken Eckert
- [time-nuts] Finding a replacement VFD for my 58503A GPSDO
Stan
- [time-nuts] Frequency Standard - Where Can I Get One.
Robert Garnett
- [time-nuts] FS740
ew
- [time-nuts] FS740 Thoughts?
Matt Huszagh
- [time-nuts] function generator
folkert
- [time-nuts] FW: [usncva] United States Naval Cryptologic Veterans Association - Digest #169
Lester Veenstra
- [time-nuts] Fw: HP 5065A, no 2nd harmonic.
cdelect at juno.com
- [time-nuts] Fwd: Re: Project Great
ew
- [time-nuts] GPS Elevation Mask Values.
Dan Kemppainen
- [time-nuts] Hermetic tantalum capacitors
John Moran, Scawby Design
- [time-nuts] HP/Symmetricom 59551A showing wrong date
va2hdd at ebox.net
- [time-nuts] HP 3561a Service Manual
Norman Reitz
- [time-nuts] HP 5065A, no 2nd harmonic.
Jared Cabot
- [time-nuts] HP 5065A, no 2nd harmonic.
cdelect at juno.com
- [time-nuts] HP 5065A, no 2nd harmonic.
cdelect at juno.com
- [time-nuts] HP 5065A on ebay
ew
- [time-nuts] info on Electronic Research Co OCXO?
Wilko Bulte
- [time-nuts] introduction
Wilko Bulte
- [time-nuts] LAVA Computers (Canada) : 40 years of Serial I/O Cards
Gregory Beat
- [time-nuts] Leap indicator set to 1 !
Steven Sommars
- [time-nuts] List Opinion/Suggestion(s)
Shawn
- [time-nuts] Lowest noise (phase noise and ADEV) method to achieve 10 MHz signal from 5 MHz input
Matt Huszagh
- [time-nuts] Lucent 849143995
Martin Flynn
- [time-nuts] measuring multiple gps modules
folkert
- [time-nuts] Microsemi Phase Noise Measurement Sets
Norman Reitz
- [time-nuts] Newbie with Broken RFTGm-II XO/Rb - Need an Elmer for Basic Advice
k1jos at att.net
- [time-nuts] NIST Technical Note 2187 - A Resilient Architecture for the Realization and Distribution of Coordinated Universal Time to Critical Infrastructure Systems in the United States
Magnus Danielson
- [time-nuts] NTP Leap indicator set to 1 ! problems continue
Steven Sommars
- [time-nuts] NTP servers
McFail Troll
- [time-nuts] Oncore UT+ Bad Almanac
k1jos at att.net
- [time-nuts] Oncore UT+ EEPROM -
k1jos at att.net
- [time-nuts] pendulum
folkert
- [time-nuts] PN9000 software?
AC0XU (Jim)
- [time-nuts] Potting compound advice needed
Richard (Rick) Karlquist
- [time-nuts] Project Great
Andy Talbot
- [time-nuts] QM10 Quartz chronometer
Peter Torry
- [time-nuts] Re: 1 pps
Hal Murray
- [time-nuts] Re: 1 pps
Gerhard Hoffmann
- [time-nuts] Re: 1 pps
B Riches
- [time-nuts] Re: 1 pps
Andy Talbot
- [time-nuts] Re: 1 pps
DM
- [time-nuts] Re: 1 pps
Darren Freeman
- [time-nuts] Re: 1 pps
Gerhard Hoffmann
- [time-nuts] Re: 1 pps / Gerber files
Gerhard Hoffmann
- [time-nuts] Re: 1 pps / Gerber files
Dan Rae
- [time-nuts] Re: 1 pps / Gerber files
Andrew Kalman
- [time-nuts] Re: 1 pps / Gerber files
DM
- [time-nuts] Re: 1 pps / Gerber files
Andrew Kalman
- [time-nuts] Re: 1 pps / Gerber files
va2hdd at ebox.net
- [time-nuts] Re: Assessing performance of a frequency counter
John Ackermann N8UR
- [time-nuts] Re: Assessing performance of a frequency counter
Bob kb8tq
- [time-nuts] Re: Can ADEV of a frequency source be correctly determined using a continuous time-stamping frequency counter?
Bob kb8tq
- [time-nuts] Re: Can ADEV of a frequency source be correctly determined using a continuous time-stamping frequency counter?
Bob kb8tq
- [time-nuts] Re: Can ADEV of a frequency source be correctly determined using a continuous time-stamping frequency counter?
Magnus Danielson
- [time-nuts] Re: Can ADEV of a frequency source be correctly determined using a continuous time-stamping frequency counter?
Richard (Rick) Karlquist
- [time-nuts] Re: Can ADEV of a frequency source be correctly determined using a continuous time-stamping frequency counter?
Magnus Danielson
- [time-nuts] Re: Can ADEV of a frequency source be correctly determined using a continuous time-stamping frequency counter?
Erik Kaashoek
- [time-nuts] Re: Can ADEV of a frequency source be correctly determined using a continuous time-stamping frequency counter?
Magnus Danielson
- [time-nuts] Re: Finding a replacement VFD for my 58503A GPSDO
Stan
- [time-nuts] Re: Frequency Standard - Where Can I Get One.
Bob kb8tq
- [time-nuts] Re: Frequency Standard - Where Can I Get One.
Skip Withrow
- [time-nuts] Re: Frequency Standard - Where Can I Get One.
Bob kb8tq
- [time-nuts] Re: Frequency Standard - Where Can I Get One.
Magnus Danielson
- [time-nuts] Re: Frequency Standard - Where Can I Get One.
Bill Notfaded
- [time-nuts] Re: Frequency Standard - Where Can I Get One.
Lux, Jim
- [time-nuts] Re: Frequency Standard - Where Can I Get One.
Lester Veenstra
- [time-nuts] Re: Frequency Standard - Where Can I Get One.
Norman Reitz
- [time-nuts] Re: FS740 Thoughts?
Bob kb8tq
- [time-nuts] Re: FS740 Thoughts?
Dana Whitlow
- [time-nuts] Re: FS740 Thoughts?
Matt Huszagh
- [time-nuts] Re: FS740 Thoughts?
ew
- [time-nuts] Re: FS740 Thoughts?
Bob kb8tq
- [time-nuts] Re: FS740 Thoughts?
Dana Whitlow
- [time-nuts] Re: FS740 Thoughts?
Matt Huszagh
- [time-nuts] Re: FS740 Thoughts?
Brooke Clarke
- [time-nuts] Re: FS740 Thoughts?
Poul-Henning Kamp
- [time-nuts] Re: FS740 Thoughts?
Matt Huszagh
- [time-nuts] Re: FS740 Thoughts?
Poul-Henning Kamp
- [time-nuts] Re: FS740 Thoughts?
Dana Whitlow
- [time-nuts] Re: FS740 Thoughts?
Poul-Henning Kamp
- [time-nuts] Re: FS740 Thoughts?
Bob kb8tq
- [time-nuts] Re: FS740 Thoughts?
Poul-Henning Kamp
- [time-nuts] Re: FS740 Thoughts?
Dana Whitlow
- [time-nuts] Re: FS740 Thoughts?
Bob kb8tq
- [time-nuts] Re: function generator
Jeremy Elson
- [time-nuts] Re: function generator
Poul-Henning Kamp
- [time-nuts] Re: function generator
Jeremy Elson
- [time-nuts] Re: function generator
Andy Talbot
- [time-nuts] Re: function generator
Jeremy Elson
- [time-nuts] Re: function generator
Erik Kaashoek
- [time-nuts] Re: function generator
Andy Talbot
- [time-nuts] Re: function generator
Lux, Jim
- [time-nuts] Re: function generator
Gerhard Hoffmann
- [time-nuts] Re: function generator
Andy Talbot
- [time-nuts] Re: function generator
Lux, Jim
- [time-nuts] Re: function generator
Lux, Jim
- [time-nuts] Re: Fw: HP 5065A, no 2nd harmonic.
ed breya
- [time-nuts] Re: Fw: HP 5065A, no 2nd harmonic.
ed breya
- [time-nuts] Re: GPS Elevation Mask Values.
Hal Murray
- [time-nuts] Re: GPS Elevation Mask Values.
Dana Whitlow
- [time-nuts] Re: GPS Elevation Mask Values.
Ryan Stoner
- [time-nuts] Re: GPS Elevation Mask Values.
Dan Kemppainen
- [time-nuts] Re: GPS Elevation Mask Values.
Dan Kemppainen
- [time-nuts] Re: GPS Elevation Mask Values.
Bob kb8tq
- [time-nuts] Re: GPS Elevation Mask Values.
Dana Whitlow
- [time-nuts] Re: GPS Elevation Mask Values.
Lux, Jim
- [time-nuts] Re: GPS Elevation Mask Values.
Jürgen Appel
- [time-nuts] Re: GPS Elevation Mask Values.
Dan Kemppainen
- [time-nuts] Re: GPS Elevation Mask Values.
Keelan Lightfoot
- [time-nuts] Re: GPS Elevation Mask Values.
Dana Whitlow
- [time-nuts] Re: GPS Elevation Mask Values.
Dana Whitlow
- [time-nuts] Re: GPS Elevation Mask Values.
Dan Kemppainen
- [time-nuts] Re: GPS Elevation Mask Values.
Dana Whitlow
- [time-nuts] Re: GPS Elevation Mask Values.
Wilko Bulte
- [time-nuts] Re: GPS Elevation Mask Values.
Dan Kemppainen
- [time-nuts] Re: GPS Elevation Mask Values.
Keelan Lightfoot
- [time-nuts] Re: GPS Elevation Mask Values.
Björn
- [time-nuts] Re: GPS Elevation Mask Values.
Peter Putnam
- [time-nuts] Re: GPS Elevation Mask Values.
Dan Kemppainen
- [time-nuts] Re: HP/Symmetricom 59551A showing wrong date
Bill Beam
- [time-nuts] Re: HP/Symmetricom 59551A showing wrong date
Hal Murray
- [time-nuts] Re: HP/Symmetricom 59551A showing wrong date
va2hdd at ebox.net
- [time-nuts] Re: HP/Symmetricom 59551A showing wrong date
Bill Beam
- [time-nuts] Re: HP/Symmetricom 59551A showing wrong date
Gregory Beat
- [time-nuts] Re: HP/Symmetricom 59551A showing wrong date
Gregory Beat
- [time-nuts] Re: HP/Symmetricom 59551A showing wrong date
va2hdd at ebox.net
- [time-nuts] Re: HP/Symmetricom 59551A showing wrong date
Hal Murray
- [time-nuts] Re: HP/Symmetricom 59551A showing wrong date
paul swed
- [time-nuts] Re: HP/Symmetricom 59551A showing wrong date
Hal Murray
- [time-nuts] Re: HP/Symmetricom 59551A showing wrong date
paul swed
- [time-nuts] Re: HP 3561a Service Manual
Dan Rae
- [time-nuts] Re: HP 3561a Service Manual
Norman Reitz
- [time-nuts] Re: HP 3561a Service Manual
Charles Steinmetz
- [time-nuts] Re: HP 3561a Service Manual
Norman Reitz
- [time-nuts] Re: HP 3561a Service Manual
Dan Rae
- [time-nuts] Re: HP 3561a Service Manual
Norman Reitz
- [time-nuts] Re: HP 3561a Service Manual
Jim Harman
- [time-nuts] Re: HP 3561a Service Manual
Richard (Rick) Karlquist
- [time-nuts] Re: HP 5065A, no 2nd harmonic.
paul swed
- [time-nuts] Re: HP 5065A, no 2nd harmonic.
Jared Cabot
- [time-nuts] Re: HP 5065A, no 2nd harmonic.
Dana Whitlow
- [time-nuts] Re: HP 5065A, no 2nd harmonic.
Tom Van Baak
- [time-nuts] Re: HP 5065A, no 2nd harmonic.
Bob kb8tq
- [time-nuts] Re: HP 5065A, no 2nd harmonic.
Germán Herrera
- [time-nuts] Re: HP 5065A, no 2nd harmonic.
paul swed
- [time-nuts] Re: HP 5065A, no 2nd harmonic.
Jared Cabot
- [time-nuts] Re: HP 5065A, no 2nd harmonic.
paul swed
- [time-nuts] Re: HP 5065A, no 2nd harmonic.
Jared Cabot
- [time-nuts] Re: HP 5065A, no 2nd harmonic.
paul swed
- [time-nuts] Re: HP 5065A, no 2nd harmonic.
Bob kb8tq
- [time-nuts] Re: HP 5065A, no 2nd harmonic.
cdelect at juno.com
- [time-nuts] Re: HP 5065A, no 2nd harmonic.
Bob kb8tq
- [time-nuts] Re: HP 5065A, no 2nd harmonic.
Jared Cabot
- [time-nuts] Re: HP 5065A, no 2nd harmonic.
lmcdavid
- [time-nuts] Re: HP 5065A, no 2nd harmonic.
Bob kb8tq
- [time-nuts] Re: HP 5065A, no 2nd harmonic.
Jared Cabot
- [time-nuts] Re: HP 5065A, no 2nd harmonic.
Bob kb8tq
- [time-nuts] Re: HP 5065A, no 2nd harmonic.
Robert LaJeunesse
- [time-nuts] Re: HP 5065A, no 2nd harmonic.
Jared Cabot
- [time-nuts] Re: HP 5065A, no 2nd harmonic.
Larry McDavid
- [time-nuts] Re: HP 5065A, no 2nd harmonic.
Jared Cabot
- [time-nuts] Re: HP 5065A, no 2nd harmonic.
Dan Rae
- [time-nuts] Re: HP 5065A, no 2nd harmonic.
paul swed
- [time-nuts] Re: HP 5065A, no 2nd harmonic.
Bob kb8tq
- [time-nuts] Re: HP 5065A, no 2nd harmonic.
lmcdavid
- [time-nuts] Re: HP 5065A on ebay
Poul-Henning Kamp
- [time-nuts] Re: HP 5065A on ebay
paul swed
- [time-nuts] Re: HP 5065A on ebay
Robert Deliën
- [time-nuts] Re: info on Electronic Research Co OCXO?
Bob kb8tq
- [time-nuts] Re: introduction
paul swed
- [time-nuts] Re: introduction
Wilko Bulte
- [time-nuts] Re: Leap indicator set to 1 !
Andy Talbot
- [time-nuts] Re: Leap indicator set to 1 !
David Taylor
- [time-nuts] Re: Leap indicator set to 1 !
Steven Sommars
- [time-nuts] Re: Leap indicator set to 1 !
Steven Sommars
- [time-nuts] Re: Leap indicator set to 1 !
Erik E. Fair
- [time-nuts] Re: Leap indicator set to 1 !
Peter Vince
- [time-nuts] Re: Leap indicator set to 1 !
Darren Freeman
- [time-nuts] Re: List Opinion/Suggestion(s)
Wilko Bulte
- [time-nuts] Re: List Opinion/Suggestion(s)
Bob kb8tq
- [time-nuts] Re: List Opinion/Suggestion(s)
Eric Scace
- [time-nuts] Re: List Opinion/Suggestion(s)
Hal Murray
- [time-nuts] Re: List Opinion/Suggestion(s)
David Taylor
- [time-nuts] Re: List Opinion/Suggestion(s)
David Taylor
- [time-nuts] Re: Lowest noise (phase noise and ADEV) method to achieve 10 MHz signal from 5 MHz input
timeok at timeok.it
- [time-nuts] Re: Lowest noise (phase noise and ADEV) method to achieve 10 MHz signal from 5 MHz input
Wilko Bulte
- [time-nuts] Re: Lowest noise (phase noise and ADEV) method to achieve 10 MHz signal from 5 MHz input
Mike Feher
- [time-nuts] Re: Lowest noise (phase noise and ADEV) method to achieve 10 MHz signal from 5 MHz input
Bob kb8tq
- [time-nuts] Re: Lowest noise (phase noise and ADEV) method to achieve 10 MHz signal from 5 MHz input
Andy Talbot
- [time-nuts] Re: Lowest noise (phase noise and ADEV) method to achieve 10 MHz signal from 5 MHz input
Jürgen Appel
- [time-nuts] Re: Lucent 849143995
kyrrin at bluefeathertech.com
- [time-nuts] Re: measuring multiple gps modules
Poul-Henning Kamp
- [time-nuts] Re: Microsemi Phase Noise Measurement Sets
Bob kb8tq
- [time-nuts] Re: NIST Technical Note 2187 - A Resilient Architecture for the Realization and Distribution of Coordinated Universal Time to Critical Infrastructure Systems in the United States
Bob kb8tq
- [time-nuts] Re: NIST Technical Note 2187 - A Resilient Architecture for the Realization and Distribution of Coordinated Universal Time to Critical Infrastructure Systems in the United States
Dave Daniel
- [time-nuts] Re: NTP Leap indicator set to 1 ! problems continue
David Malone
- [time-nuts] Re: NTP servers
W7SLS
- [time-nuts] Re: NTP servers
Denny Page
- [time-nuts] Re: NTP servers
Sanjeev Gupta
- [time-nuts] Re: NTP servers
David Taylor
- [time-nuts] Re: NTP servers
Hal Murray
- [time-nuts] Re: NTP servers
Andy Talbot
- [time-nuts] Re: NTP servers
Gregory Beat
- [time-nuts] Re: NTP servers
Denny Page
- [time-nuts] Re: NTP servers
Lester Veenstra
- [time-nuts] Re: NTP servers
McFail Troll
- [time-nuts] Re: NTP servers
McFail Troll
- [time-nuts] Re: NTP servers
McFail Troll
- [time-nuts] Re: NTP servers
Steven Sommars
- [time-nuts] Re: NTP servers
Denny Page
- [time-nuts] Re: NTP servers
Avamander
- [time-nuts] Re: NTP servers
folkert
- [time-nuts] Re: NTP servers
Gerhard Hoffmann
- [time-nuts] Re: Oncore UT+ Bad Almanac
paul swed
- [time-nuts] Re: Oncore UT+ EEPROM -
Poul-Henning Kamp
- [time-nuts] Re: Oncore UT+ EEPROM -
wbeam at gci.net
- [time-nuts] Re: Oncore UT+ EEPROM -
Angus
- [time-nuts] Re: Oncore UT+ EEPROM -
paul swed
- [time-nuts] Re: pendulum
Don Cross
- [time-nuts] Re: pendulum
djl
- [time-nuts] Re: pendulum
Brent
- [time-nuts] Re: PN9000 software?
Norman Reitz
- [time-nuts] Re: PN9000 software?
Richard (Rick) Karlquist
- [time-nuts] Re: PN9000 software?
Dave B
- [time-nuts] Re: PN9000 software?
Peter Burgess
- [time-nuts] Re: Potting compound advice needed
Lux, Jim
- [time-nuts] Re: Potting compound advice needed
Brooke Clarke
- [time-nuts] Re: Potting compound advice needed
Lux, Jim
- [time-nuts] Re: Potting compound advice needed
Mike Feher
- [time-nuts] Re: Potting compound advice needed
Gerhard Hoffmann
- [time-nuts] Re: Potting compound advice needed
Lux, Jim
- [time-nuts] Re: Potting compound advice needed
Javier Herrero
- [time-nuts] Re: Potting compound advice needed
Lux, Jim
- [time-nuts] Re: Potting compound advice needed
Gregory Beat
- [time-nuts] Re: Potting compound advice needed
djl
- [time-nuts] Re: Potting compound advice needed
Lux, Jim
- [time-nuts] Re: Potting compound advice needed
djl
- [time-nuts] Re: Project Great
Lux, Jim
- [time-nuts] Re: Project Great
Hal Murray
- [time-nuts] Re: Project Great
Tom Van Baak
- [time-nuts] Re: Project Great
Andy Talbot
- [time-nuts] Re: Project Great
Thomas Valerio
- [time-nuts] Re: Project Great
Lux, Jim
- [time-nuts] Re: Project Great
Bob kb8tq
- [time-nuts] Re: Project Great
Magnus Danielson
- [time-nuts] Re: Project Great
Lux, Jim
- [time-nuts] Re: Project Great
Magnus Danielson
- [time-nuts] Re: Project Great
Tom Van Baak
- [time-nuts] Re: Project Great
Hal Murray
- [time-nuts] Re: Project Great
Dave ZL3FJ
- [time-nuts] Re: Project Great
Andy Talbot
- [time-nuts] Re: Project Great
Wilko Bulte
- [time-nuts] Re: Project Great
Lux, Jim
- [time-nuts] Re: Project Great
Lux, Jim
- [time-nuts] Re: Project Great
Bernd Neubig
- [time-nuts] Re: Project Great
Lux, Jim
- [time-nuts] Re: Project Great
Gerhard Hoffmann
- [time-nuts] Re: Project Great
Marek Doršic
- [time-nuts] Re: Project Great
Lux, Jim
- [time-nuts] Re: Project Great
Tom Van Baak
- [time-nuts] Re: Project Great
Lux, Jim
- [time-nuts] Re: Project Great
Hal Murray
- [time-nuts] Re: Project Great
Poul-Henning Kamp
- [time-nuts] Re: Project Great
Magnus Danielson
- [time-nuts] Re: Project Great
Lux, Jim
- [time-nuts] Re: Project Great
Bob kb8tq
- [time-nuts] Re: QM10 Quartz chronometer
Scott McGrath
- [time-nuts] Re: QM10 Quartz chronometer
perdix at tellink.net
- [time-nuts] Re: QM10 Quartz chronometer
Don Couch
- [time-nuts] Re: QM10 Quartz chronometer
David G. McGaw
- [time-nuts] Re: QM10 Quartz chronometer
Andy Talbot
- [time-nuts] Re: RFTGm-II (KS-24019) XO Fault but GPS to Rb is OK
Bob kb8tq
- [time-nuts] Re: RFTGm-II (KS-24019) XO Fault but GPS to Rb is OK
k1jos at att.net
- [time-nuts] Re: RFTGm-II (KS-24019) XO Fault but GPS to Rb is OK
k1jos at att.net
- [time-nuts] Re: RFTGm-II-XO L108 &L109 Oscillator PLL Failure
Szeker K.
- [time-nuts] Re: RFTGm-II-XO L108 &L109 Oscillator PLL Failure
ed breya
- [time-nuts] Re: Ryzen mobos with serial port for Garmin GPS?
Darren Freeman
- [time-nuts] Re: Ryzen mobos with serial port for Garmin GPS?
Rich Wales
- [time-nuts] Re: Ryzen mobos with serial port for Garmin GPS?
Thomas Valerio
- [time-nuts] Re: Ryzen mobos with serial port for Garmin GPS?
Alec Teal
- [time-nuts] Re: Ryzen mobos with serial port for Garmin GPS?
Alec Teal
- [time-nuts] Re: Ryzen mobos with serial port for Garmin GPS?
Andy Talbot
- [time-nuts] Re: Ryzen mobos with serial port for Garmin GPS?
Andy Talbot
- [time-nuts] Re: Ryzen mobos with serial port for Garmin GPS?
Bill Dailey
- [time-nuts] Re: Ryzen mobos with serial port for Garmin GPS?
Andy Talbot
- [time-nuts] Re: Ryzen mobos with serial port for Garmin GPS?
Lux, Jim
- [time-nuts] Re: Ryzen mobos with serial port for Garmin GPS?
Rich Wales
- [time-nuts] Re: Ryzen mobos with serial port for Garmin GPS?
Angus
- [time-nuts] Re: Ryzen mobos with serial port for Garmin GPS?
Rich Wales
- [time-nuts] Re: Ryzen mobos with serial port for Garmin GPS?
Chris Caudle
- [time-nuts] Re: Ryzen mobos with serial port for Garmin GPS?
Bob kb8tq
- [time-nuts] Re: Ryzen mobos with serial port for Garmin GPS?
John Ackermann N8UR
- [time-nuts] Re: Ryzen mobos with serial port for Garmin GPS?
Angus
- [time-nuts] Re: Seeking advice: Is this the right way to check very short term (below 1s) stability?
Bob kb8tq
- [time-nuts] Re: Seeking advice: Is this the right way to check very short term (below 1s) stability?
Andy Talbot
- [time-nuts] Re: Seeking advice: Is this the right way to check very short term (below 1s) stability?
Andy Talbot
- [time-nuts] Re: Seeking advice: Is this the right way to check very short term (below 1s) stability?
Magnus Danielson
- [time-nuts] Re: Symmetricom XLi question
va2hdd at ebox.net
- [time-nuts] Re: time-nuts Digest, Vol 211, Issue 26
martyn at ptsyst.com
- [time-nuts] Re: Updated TimeHat image (new gpsd!)
Bill Dailey
- [time-nuts] Re: Updated TimeHat image (new gpsd!)
Bob Darlington
- [time-nuts] Re: Updated TimeHat image (new gpsd!)
Rob Seaman
- [time-nuts] RFTGm-II-XO L108 &L109 Oscillator PLL Failure
k1jos at att.net
- [time-nuts] Ryzen mobos with serial port for Garmin GPS?
Rich Wales
- [time-nuts] Seeking advice: Is this the right way to check very short term (below 1s) stability?
Erik Kaashoek
- [time-nuts] Symmetricom XLi question
Martin Flynn
- [time-nuts] Z3805 PPS on comm port?
John Ackermann N8UR
- No subject
- No subject
Last message date:
Tue Nov 30 21:04:57 UTC 2021
Archived on: Tue Nov 30 21:32:09 UTC 2021
This archive was generated by
Pipermail 0.09 (Mailman edition).