[time-nuts] Re: FS740 Thoughts?
Bob kb8tq
kb8tq at n1k.org
Wed Nov 17 15:34:25 UTC 2021
Hi
In this case itâs not thermal. Iâve tested a ton of parts in the same environment ( maybe
not 2,000 pounds but several hundred OCXOâs ).
The PRS-10 gives you that hump at 2 seconds no matter what you do. Itâs part of the
basic design of the unit â¦.
Bob
> On Nov 17, 2021, at 10:16 AM, Matt Huszagh <huszaghmatt at gmail.com> wrote:
>
> Bob kb8tq <kb8tq at n1k.org> writes:
>
>> I have a 740 as do others on the list. The big gotcha is the OCXO in the device.
>> It has various quirks that limit the performance of the device. The ADEV plot they
>> show for the OCXO is a âsometimes / maybe / mightâ sort of thing. One of the
>> âget to it eventuallyâ projects here is to see if it can be replaced with something
>> that has better ADEV performance.
>
> Good to know. Have you tried disciplining the PRS-10 in one of these
> units? Based on Dana's comments, it sounds like this may not exhibit the
> same ADEV susceptibility to the thermal environment.
>
> Matt
More information about the Time-nuts_lists.febo.com
mailing list