[time-nuts] Re: 1 pps
DM
dgminala at mediacombb.net
Thu Nov 11 15:16:34 UTC 2021
Gerhard,
May I have a copy of the Gerbers for the Doubler-Distribution amp? I started designing a PCB for the board myself, but if you could send me a copy of your files, surely would save me a ton of time and work.
Thanks for your willingness to share your work.
DaveM
Hazel Green, AL, USA
From: "Gerhard Hoffmann" <ghf at hoffmann-hochfrequenz.de>
To: time-nuts at lists.febo.com
Sent: Wednesday, November 10, 2021 6:52:56 PM
Subject: [time-nuts] Re: 1 pps
Am 10.11.21 um 23:56 schrieb B Riches via time-nuts:
> Any ideas on how to get a useable 1 pps output sig out of a Lucent KS-24361 to use with SL sampling rate detector.
> I am using the 1 pps output from a Jackson unit but would like to use the Lucent if I can since that is my gps standard.
> 73
> Bill, WA2DVUCape May, NJ
There are some pics with red arrows herein:
< http://www.hoffmann-hochfrequenz.de/downloads/DoubDist.pdf >
The board I made was home-etched, so there are no left-overs,
but you or whoever can get the Altium or Gerber files.
Should be less than 20 bucks for 10 boards from JLCPCB,
including postage.
Cheers, Gerhard
_______________________________________________
time-nuts mailing list -- time-nuts at lists.febo.com -- To unsubscribe send an email to time-nuts-leave at lists.febo.com
To unsubscribe, go to and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list