[time-nuts] Re: Crystal oscillator for a begginer

[Ben Bradley]

The oscillator you linked to has a fixed frequency output. You might
prefer to get a vcxo that has a DC control voltage input that will
slightly change the output frequency so it can be adjusted to be
closer to "exact." This appears to be the least expensive one with a
10MHz output:
https://www.digikey.com/en/products/detail/suntsu-electronics-inc/SVC75C3C07D2-10-000M/12341839

On Wed, Jan 5, 2022 at 8:22 PM Adam Space <time.isanapp at gmail.com> wrote:
>
> My question is rather open ended. I'm relatively new to timing and whatnot.
> So far I have mainly dabbled in NTP, and some GPS stuff with a Raspberry Pi
> with a GPS hat. But both of these are limited to timekeeping on an actual
> computer system, but I'd like to get into some of the more hardware stuff,
> and I figured a crystal oscillator would be a good place to start.
>
> My knowledge of hardware is pretty weak, so I am unsure of how stuff works
> in this realm. For example, a quick google search shows very cheap crystal
> oscillators, like these
> <https://www.digikey.com/en/products/detail/cts-frequency-controls/MXO45-3C-10M000000/1801887>.
> But I am confused on how I could exactly use this. One thing I like about
> NTP is that I can see and compare different clocks, and synchronize them
> to time-scales like UTC, and track their performance over time. But if I
> have a crystal oscillator going, how could I compare it or adjust it to
> other clocks on my network, or to UTC for example?
>
> Or to take another example, suppose I have a few crystal oscillators like
> the one above. Is there a way I could compare them to each other, or log
> the offsets from each other, and so on? Ultimately, it would be nice to
> compare the frequency and time offsets to a reference source that is
> accurate long-term, like my GPS hat Raspberry Pi.
>
> Any ideas, suggestions, or clarifications are welcome. Additionally, if
> anyone knows of any guides (either text, video, or whatever), that would be
> great too.
>
> Adam
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com -- To unsubscribe send an email to time-nuts-leave at lists.febo.com
> To unsubscribe, go to and follow the instructions there.