[time-nuts] Re: PICDIV stability (was: Crystal oscillator for a begginer)
Bob kb8tq
kb8tq at n1k.org
Sat Jan 8 21:42:25 UTC 2022
Hi
Milk jugs full of water work pretty well for added thermal mass.
For some odd reason the typical fridge seems to be able to âacceptâ
a number of them â¦..
A small fan to keep the air moving and knock down gradient based
issues is a relatively cheap improvement.
Bob
> On Jan 8, 2022, at 4:25 PM, Poul-Henning Kamp <phk at phk.freebsd.dk> wrote:
>
> --------
> Attila Kinali writes:
>
>> Oh.. and if anyone is going to build a DIY oven for some instruments, a 55x35x30cm
>> styrofoam box with 2cm wall thickness, suspended in air has a thermal resistance of
>> approximately 3K/W. But beware that proper seating of the lid is quite critical as
>> that alone can drop the thermal resistance by a factor of 3 (guess how I know).
>
> Sorry for repeating myself about this:
>
> If you want a good thermally stable enclosure, pick and old freezer
> or fridge, leave it unplugged, add as many bricks as you can for
> thermal mass and get on with the fun stuff...
>
> They come in all sizes, have well designed door closing mechanisms
> and can often be had for free, when a working compressor is not
> needed.
>
> If you need active temperature control, get somebody with the proper
> kit to suck the gas out, and run water through the nice plumbing
> already installed.
>
>
> --
> Poul-Henning Kamp | UNIX since Zilog Zeus 3.20
> phk at FreeBSD.ORG | TCP/IP since RFC 956
> FreeBSD committer | BSD since 4.3-tahoe
> Never attribute to malice what can adequately be explained by incompetence.
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com -- To unsubscribe send an email to time-nuts-leave at lists.febo.com
> To unsubscribe, go to and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list