[time-nuts] DIY Low offset Phase Noise Analyzer (Erik Kaashoek)

[Mike Monett]

to Bob kb8tq:

> The idea is partly to lock the two devices. The bigger  objective is
> to hold the mixer output at the correct zero volt operating point.

> Cabling things to a different device and then doing phase correction
> to keep things at zero would be a major pain.

> Bob

All the more reason to switch to the Hittite HMC984LP4E:

https://www.analog.com/media/en/technical-documentation/data-sheets/hmc984.pdf

Mike