[time-nuts] Re: Neon clock from factory at Motorola years ago
Michael Bafaro
m.bafaro at comcast.net
Thu Nov 24 16:10:38 UTC 2022
The connector is a AMP inc. 4 pin Mate-N-Lock connector. It is still available from Digikey and other distributors.
Mike
-----Original Message-----
From: Bill Notfaded via time-nuts <time-nuts at lists.febo.com>
Sent: Wednesday, November 23, 2022 4:03 PM
To: Discussion of precise time and frequency measurement <time-nuts at lists.febo.com>
Cc: Bill Notfaded <notfaded1 at gmail.com>
Subject: [time-nuts] Neon clock from factory at Motorola years ago
So I've got this clock that has white neon around the face. It has separate 110V plug for the neon but in the factory it was controlled.
Attached are some pictures of it. I'm looking to get it going again. It's about 2 feet in diameter and they were in multiple factories.
The brand is Lumichron. See the pics. The control is two wires. I'm thinking 12V with a coded signal but I'm not sure?
Anyone recognize the connector and how you control/power these?
It's white neon around the face. I'll post more pictures of the front later. This is the timing connector. The other white cable just powers the neon.
Bill
More information about the Time-nuts_lists.febo.com
mailing list