[time-nuts] Demodulate WWVB

[Todd Smith]

I am starting a new thread since my question from the last thread has been
answered.  My Syncserver S300 is not able to receive WWVB signals because
of the phase modulation.  I would like to build/buy something that will
demodulate the signal so that both of my Syncservers in two locations can
receive the WWVB signal.

I see this article that might be a good starting point but does it decode
the phase modulation?  I would want to add a BNC connector to the board to
attach to my external antenna.  I would also want to add an additional BNC
connector to feed to the Syncserver.

https://www.instructables.com/WWVB-radio-time-signal-generator-for-ATTINY45-or-A/

Todd