[time-nuts] Re: Demodulate WWVB

[Brooke Clarke]

Hi Todd:

Universal-Solder sells both AM and PM receiver boards for WWVB.
https://universal-solder.ca/?s=WWVB&post_type=product&product_cat=0

Also see:
https://prc68.com/I/Loop.shtml

-- 
Have Fun,

Brooke Clarke, N6GCE
https://www.PRC68.com
axioms:
1. The extent to which you can fix or improve something will be limited by how well you understand how it works.
2. Everybody, with no exceptions, holds false beliefs.

-------- Original Message --------
> I am starting a new thread since my question from the last thread has been
> answered.  My Syncserver S300 is not able to receive WWVB signals because
> of the phase modulation.  I would like to build/buy something that will
> demodulate the signal so that both of my Syncservers in two locations can
> receive the WWVB signal.
>
> I see this article that might be a good starting point but does it decode
> the phase modulation?  I would want to add a BNC connector to the board to
> attach to my external antenna.  I would also want to add an additional BNC
> connector to feed to the Syncserver.
>
> https://www.instructables.com/WWVB-radio-time-signal-generator-for-ATTINY45-or-A/
>
> Todd
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe send an email to time-nuts-leave at lists.febo.com
>