[time-nuts] Re: info on Tele Quarz Group 5 MHz oscillator?
Wilko Bulte
wkb at xs4all.nl
Mon Dec 11 18:10:34 UTC 2023
"Who dares wins". Armed with a current-limited lab supply I arrived at the pinout pictured below. Uref ~= 7.87 V, Usup = 12V. Isup ~= 0.5 A during warmup. Steady state Isup ~= 0.2 A. Output is sinewave.
Sent to the list for the benefit of Google e.a.
thanks!
Wilko
> On 11 Dec 2023, at 17:21, Bob kb8tq <kb8tq at n1k.org> wrote:
>
> Hi
>
> Ok, itâs pretty obvious that one of the 5 pins is hooked to the case. Typically that means it is the ground / supply return pin. On the most common pinout these days for that same package, the ground is in a different location. One of many examples of this pinout:
>
> https://www.morion-us.com/catalog_pdf/mv89.pdf
>
> As shown, all 5 pins have a specific function.
>
> With no Vref there might be a ground pin at the Vref location. If there is another pin doing the âreturnâ function, that should be pretty obvious with an ohmmeter test. This is pretty unlikely.
>
> Supply wise, best guess is 12V, 24V would come in second. A distant third would be âsomething between 10 and 28Vâ.
>
> Bob
>
>> On Dec 11, 2023, at 5:29â¯AM, Wilko Bulte <wkb at xs4all.nl> wrote:
>>
>> hi Bob,
>>
>> Thank you. It is ancient but appears to be NOS at the same time. So maybe interesting to study its aging (?).
>>
>> That said: below 2 pictures with a cm ruler for scale purposes.
>>
>> <image0.jpeg>
>>
>> <image1.jpeg>
>>
>> Wilko
>>
>>> On 11 Dec 2023, at 03:36, Bob kb8tq <kb8tq at n1k.org> wrote:
>>>
>>> Hi
>>>
>>> If the 40.92 on the label is talking about the 40th week of 1992, that would make this a > 30 year old part. Thatâs well before folks started putting specs and catalogs up on the internet â¦. Itâs also pretty far back in the whole: Tele Quartz => Oak => Corning => Vectron => Microsemi => Microchip progression.
>>>
>>> A picture of the package might help folks come up with something that could help ( = a lot of these packages had common pinouts â¦.).
>>>
>>> Bob
>>>
>>>> On Dec 10, 2023, at 12:51â¯PM, Wilko Bulte via time-nuts <time-nuts at lists.febo.com> wrote:
>>>>
>>>> Last week I bought a tinyPFA (does that count as a light frequency-nut infection?). The first measurements with TimeLab have been made (more on that later). As it goes, I am obviously experimenting (and scratching my head..) a lot right now.
>>>>
>>>> Next plan is to measure my Efratom FRK-HLN 5 MHz unit against a brand new 5 MHz Tele Quarz Group oscillator I acquired at a ham fest.
>>>>
>>>> Only problem: no data on pinout or specs that I could find on the net. Maybe someone on this list can help me?
>>>>
>>>> 73 Wilko
>>>> PA1WBU
>>>>
>>>>
>>>>
>>>> <image1.jpeg>
>>>> _______________________________________________
>>>> time-nuts mailing list -- time-nuts at lists.febo.com
>>>> To unsubscribe send an email to time-nuts-leave at lists.febo.com
>>>
>
More information about the Time-nuts_lists.febo.com
mailing list