[time-nuts] Re: Rooftop GNSS antenna mounting recommendations

[Don R]

I’d go one step further.  In the event the anchor is not rust proof,  after final assembly I’d coat the metal tightening nut of GNSS antenna and part of the threaded area with a thick layer of silicone rubber GE 25yr etc.  it will make dissemble much easier down the road.

Don Resor 

Sent from someone's iPhone

> 
> https://learn.sparkfun.com/tutorials/how-to-build-a-diy-gnss-reference-station/all#affix-your-antenna
> 
> This seems like an easy and low-cost method. Given the weight of the
> cinder block, I wouldn't expect the antenna to move. Thoughts? Any
> potential problems with this? Other methods that work well?
> 
> Matt
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe send an email to time-nuts-leave at lists.febo.com
>