[time-nuts] Re: Mystery board in a TS2100

[Andrew Kalman]

perhaps for a bias tee to power the remote antenna, at a different voltage
than the Trimble board?

On Saturday, June 24, 2023, Martin Flynn via time-nuts <
time-nuts at lists.febo.com> wrote:

> Have a TS2100 I am installing a Heol Design GPS board in.
>
> There is an extra board between the Trimble board antenna connector  and
> the antenna cable.
>
> P/N is 172461A, has a pair of orange & white wires going to a three pin
> header on the far side of the main board.
>
> Any ideas?
>
> Martin
>
>
>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe send an email to time-nuts-leave at lists.febo.com



-- 
--Andrew

--------------------------------
Andrew E. Kalman, Ph.D.