[time-nuts] Re: pps pulse timestamp device

[JOHN HARTZELL]

Still needs a stable 10 MHz reference clock.

Kind regards,

John

https://linkedin.com/in/john-h-6a131b12/




> On Feb 11, 2024, at 12:20 PM, John Miller via time-nuts <time-nuts at lists.febo.com> wrote:
> 
> Juan,
> Check out the TAPR TICC: https://tapr.org/product/tapr-ticc/
> 
> John K1QLN
> 
> 
> -------- Original Message --------
> Subject: [time-nuts] pps pulse timestamp device
> Date: 2024-02-11 7:37 am
> From: juan--- via time-nuts <time-nuts at lists.febo.com>
> To: time-nuts at lists.febo.com
> 
> Hi all,
> 
> I am looking for a cheap device (e.g. Teansy, micropython board, etc) that would help me measure with ns resolution some pulses at one event per second rate (gps pps).
> 
> It would need quite a stable clock such that any jitter would be attributable to the pulse signal.
> 
> Any ideas what is the best way around this nowadays?
> 
> Thanks,
> Juan.
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe send an email to time-nuts-leave at lists.febo.com
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe send an email to time-nuts-leave at lists.febo.com