[volt-nuts] Solartron 7081 Test Leads

[J. L. Trantham]

Jerry,

The key arrived today and thank you.  I picked up the connectors yesterday
from my office.  They look to be correct.  Stan is waiting on my check to
arrive so meter will probably be here in a couple of weeks.

I'll let you know if I need the switch.  Look forward to getting it up and
working.

Thanks again.

Joe

-----Original Message-----
From: volt-nuts-bounces at febo.com [mailto:volt-nuts-bounces at febo.com] On
Behalf Of gsteinba52 at aol.com
Sent: Thursday, August 04, 2011 6:34 PM
To: volt-nuts at febo.com
Subject: Re: [volt-nuts] Solartron 7081 Test Leads


 Sorry guys, I can never figure out how to use these lists (from the
digest).


Hi Joe,

The cal switch is by Microswitch. I bought a couple of them since I was in
the same situation as yourself (used box, no key). Bill suggested breaking
out the old switch as the mounting tabs are really hard to get to. Before
doing that I simply tried the new switch key in the existing cal switch.
Quickest fix I've every made. The same key also worked on a 7061 carcass.
Obviously the keys are not for security, and I would imagine a Cal Lab would
go berserk if they had to maintain hundreds of individual keys, one for each
instrument.

Send me your address and I'll put a key in the mail - if it doesn't work
I'll sell you the switch for a very reasonable price.

Jerry

?

?

?

?

------------------------------ 

?

Message: 8 

Date: Thu, 4 Aug 2011 17:43:08 -0500 

From: "J. L. Trantham" <jltran at att.net> 

To: "'Discussion of precise voltage measurement'" <volt-nuts at febo.com>


Subject: Re: [volt-nuts] Solartron 7081 Test Leads 

Message-ID: <FCCFDBA084184EF49B2A23183466C4C4 at yourb25d9e178c> 

Content-Type: text/plain;??? charset="us-ascii" 

?

Bill, 

?

Thanks for all the info. 

?

I ordered the connectors from Kensington Electronics using the part numbers 

posed on an earlier email.? Very friendly folks but they want a 'company' 

name.? I used my practice. 

?

http://www.keiconn.com/ 

?

They have a $50 minimum order.? One connector and cable clamp meets that 

requirement. 

?

I would appreciate the part number of the switch you ordered.? Also, if you 

could send me a picture of the connector end and the 'probe' end of the 

cables you found, I would appreciate it. 


 

_______________________________________________
volt-nuts mailing list -- volt-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.