[volt-nuts] Solartron 7081 Test Leads

[Steve]

Jerry,

Would you mind sharing the Microswitch part number if it's close to hand?

Thanks

Steve


On Aug 4, 2011, at 6:33 PM, gsteinba52 at aol.com wrote:

> Sorry guys, I can never figure out how to use these lists (from the digest).
> 
> 
> Hi Joe,
> 
> The cal switch is by Microswitch. I bought a couple of them since I was in the same situation
> as yourself (used box, no key). Bill suggested breaking out the old switch as the mounting tabs
> are really hard to get to.
> Before doing that I simply tried the new switch key in the existing cal switch. Quickest fix I've
> every made. The same key also worked on a 7061 carcass.
> Obviously the keys are not for security, and I would imagine a Cal Lab would go berserk if they
> had to maintain hundreds of individual keys, one for each instrument.
> 
> Send me your address and I'll put a key in the mail - if it doesn't work I'll sell you the switch
> for a very reasonable price.
> 
> Jerry
> 
> ?
> 
> ?
> 
> ?
> 
> ?
> 
> ------------------------------ 
> 
> ?
> 
> Message: 8 
> 
> Date: Thu, 4 Aug 2011 17:43:08 -0500 
> 
> From: "J. L. Trantham" <jltran at att.net> 
> 
> To: "'Discussion of precise voltage measurement'" <volt-nuts at febo.com> 
> 
> Subject: Re: [volt-nuts] Solartron 7081 Test Leads 
> 
> Message-ID: <FCCFDBA084184EF49B2A23183466C4C4 at yourb25d9e178c> 
> 
> Content-Type: text/plain;??? charset="us-ascii" 
> 
> ?
> 
> Bill, 
> 
> ?
> 
> Thanks for all the info. 
> 
> ?
> 
> I ordered the connectors from Kensington Electronics using the part numbers 
> 
> posed on an earlier email.? Very friendly folks but they want a 'company' 
> 
> name.? I used my practice. 
> 
> ?
> 
> http://www.keiconn.com/ 
> 
> ?
> 
> They have a $50 minimum order.? One connector and cable clamp meets that 
> 
> requirement. 
> 
> ?
> 
> I would appreciate the part number of the switch you ordered.? Also, if you 
> 
> could send me a picture of the connector end and the 'probe' end of the 
> 
> cables you found, I would appreciate it. 
> 
> 
> 
> 
> _______________________________________________
> volt-nuts mailing list -- volt-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
> and follow the instructions there.