[volt-nuts] Fluke 731B replacement
Rob Klein
rob.klein at smalldesign.nl
Fri Feb 3 17:55:20 UTC 2012
Hi Randy,
Send me the LTSpice file and I'll take a look at it for you.
Regards,
Rob Klein.
Op 3-2-2012 17:58, Randy Evans schreef:
I am planning on building an equivalent Fluke 731B transfer Standard using a VRE
310 10V Precision reference and LTC5400 Quad resistor as a precision 10:1 divide
r, plus ancillary circuits. However, before starting the detailed design I mode
led the Fluke 731B circuit in LTSpice. The 1V, 1.018V and 1.019V outputs are fi
ne but the 0 to 999uV delta E adjustment circuit for the delta V, 1.018 + delta
E and 1.019 + delta E outputs does not work per the circuit modeled from the sch
ematic. I have double and triple checked my LTSpice schematic per the Fluke 731
B schematic but I can't see any difference. Maybe I am just too close to the fo
rest to see the trees.
Note: The Fluke 731B schematic from the manula I have does not show the value of
the delta E adjustment pot but the parts list shows a value of 5K ohms.
Does anyone have any ideas? I can forward the LTSpice schematic I am using to a
nyone that might be interested, just send me your e-mail address.
Thanks,
Randy Evans
_______________________________________________
volt-nuts mailing list -- [1]volt-nuts at febo.com
To unsubscribe, go to [2]https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.
References
1. mailto:volt-nuts at febo.com
2. https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
More information about the volt-nuts
mailing list