[volt-nuts] EDC VS330 Voltage Standard

[J. L. Trantham]

Sorry to hear that.  I suspect someone has one somewhere.  Hopefully you'll
get lucky as well.

Joe

-----Original Message-----
From: volt-nuts-bounces at febo.com [mailto:volt-nuts-bounces at febo.com] On
Behalf Of Joseph Gray
Sent: Monday, August 05, 2013 1:17 PM
To: Discussion of precise voltage measurement
Subject: Re: [volt-nuts] EDC VS330 Voltage Standard

Just a follow up. You were lucky getting a manual. I just got a reply from
Krohn-Hite, saying that no manual was avaialble.

Joe Gray
W5JG



On Sun, Jul 28, 2013 at 4:11 PM, J. L. Trantham <jltran at att.net> wrote:

>
> Do you have a manual?  I have an EDC CR103 voltage and current 
> standard and was able to find a 'partial' manual on the web.  It noted 
> that a complete manual was available from Krohn-Hite and to contact 
> them at (508) 508-1660 or sales at krohn-hite.com to purchase a complete 
> manual.  When I emailed them about obtaining one, I received a 
> complete .PDF manual by return email from one of their service 
> engineers.  Others have had a similar experience.
>  When
> asked, Krohn-Hite asked that the manuals not be 'shared'.  So, if you 
> can't find one, you might try contacting them.
>
> Good luck.
>
> Joe
>
_______________________________________________
volt-nuts mailing list -- volt-nuts at febo.com To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.