[volt-nuts] EDC VS330 Voltage Standard

[Joseph Gray]

I got another response from K-H. They also won't calibrate this model.

So far, the only place that I have found a manual is Surplus Sales. They
list a "copy" of the manual for $20. I'll think about it while I keep
looking for a free one.

Joe Gray
W5JG



On Mon, Aug 5, 2013 at 12:26 PM, J. L. Trantham <jltran at att.net> wrote:

> Sorry to hear that.  I suspect someone has one somewhere.  Hopefully you'll
> get lucky as well.
>
> Joe
>
> -----Original Message-----
> From: volt-nuts-bounces at febo.com [mailto:volt-nuts-bounces at febo.com] On
> Behalf Of Joseph Gray
> Sent: Monday, August 05, 2013 1:17 PM
> To: Discussion of precise voltage measurement
> Subject: Re: [volt-nuts] EDC VS330 Voltage Standard
>
> Just a follow up. You were lucky getting a manual. I just got a reply from
> Krohn-Hite, saying that no manual was avaialble.
>
> Joe Gray
> W5JG
>
>
>
> On Sun, Jul 28, 2013 at 4:11 PM, J. L. Trantham <jltran at att.net> wrote:
>
> >
> > Do you have a manual?  I have an EDC CR103 voltage and current
> > standard and was able to find a 'partial' manual on the web.  It noted
> > that a complete manual was available from Krohn-Hite and to contact
> > them at (508) 508-1660 or sales at krohn-hite.com to purchase a complete
> > manual.  When I emailed them about obtaining one, I received a
> > complete .PDF manual by return email from one of their service
> > engineers.  Others have had a similar experience.
> >  When
> > asked, Krohn-Hite asked that the manuals not be 'shared'.  So, if you
> > can't find one, you might try contacting them.
> >
> > Good luck.
> >
> > Joe
> >
> _______________________________________________
> volt-nuts mailing list -- volt-nuts at febo.com To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
> and follow the instructions there.
>
> _______________________________________________
> volt-nuts mailing list -- volt-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
> and follow the instructions there.
>
>