[volt-nuts] Datron 4910 components
Steve - Home
steve-krull at cox.net
Tue Aug 20 20:57:29 EDT 2013
Thanks Frank, much appreciated!
Steve
WB0DBS
On Aug 20, 2013, at 4:27 PM, Frank Stellmach <frank.stellmach at freenet.de> wrote:
> Steve,
>
> yep, it's in the LTZ100 thread.
> We discussed intensively the sense or nonsense of those slots in the Datron PCB design, which is very often (blindly) copied by others...
>
> Mickle T. contributed the already known schematics and he measured all resistor values of the Vishay array.
>
> Then, quarks simply added a schematic of this array, which he received directly from Vishay, obviously.
>
> So, Datron used 21 Ohm in series with the Zener for better T.C. (originally 50ppm/K), 9k/659 as initial divider for temperature regulation (altered by the external temp. PWM), 128 Ohm for the Zener current, 39k as collector resistor for the reference transistor.
>
> There's no complete schematic yet, but now it's possible to finalize that.
>
> Here's the link:
>
> http://www.eevblog.com/forum/projects/ultra-precision-reference-ltz1000/300/
>
> Frank
> _______________________________________________
> volt-nuts mailing list -- volt-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
> and follow the instructions there.
More information about the volt-nuts
mailing list