[volt-nuts] Fluke 845AB / 845AR neon bulb xref

[Charles Black]

Hi Christopher,

I used some look alike  NE-2's from ebay and they worked fine. Just 
search for ne2.

Good luck!

Charlie


On 11/6/2013 2:34 AM, Christopher Brown wrote:
> So, working on a couple of 845s.
>
> The AR is a franken unit assembled from the parts of 2 damaged units.
>
> Works well, but intermittently, both neons are very weak.
>
> The AB was working well after cleaning up the leaking battery mess, and
> recapping but one of the bulbs failed.
>
>
> Looking at the original manual and a 1990 update I get
>
> NE-2U
>
> AND
>
> Lamp, NEON, 105-125V, 0.7MA, Wire Leads A9A-1
>
>
> Cannot seem to find direct or xref
>
>
> Mouser show a Chicago Miniature A9A but no A9A-1 and A9A is 65VAC/90VDC
>
>
> NE-2U seems to cross to A3C, but cannot find A3C and A3C specs seem to
> indicate 1.9ma
>
>
> Can anyone help with the correct spec, xref to current part and supplier?
>
> _______________________________________________
> volt-nuts mailing list -- volt-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
> and follow the instructions there.
>
>