[volt-nuts] fluke 5200a extender

[Kgoodhew]

Had a look at the pin outs on both the power amplifier and the power supply regulator boards and the maximum potential difference between any two adjacent pins is 190 volts.
EG. +300 v to +190 v to 190v return to -190v to -300v on consecutive pins on the power amplifier board.
A similar situation exist on the power supply regulator board, at no stage is there a 300 volt difference between any two adjacent pins, so this should drop the possible arcing problem considerably
Ken Goodhew.



---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com