[time-nuts] ICS525 synthesizer performance
Brooke Clarke
brooke at pacific.net
Sun May 14 23:43:38 UTC 2006
Hi John:
I can see that your product is very different from mine and would like
to link to your web page if that's OK. Thanks for posting the phase
noise plots.
I've started a web page for my Battery Top Signal Generator ICS525, see:
http://www.pacificsites.com/~brooke/BTSG.shtml
I'm still in the process of Pushing the Limits in terms of the
frequencies you can get out of the 525-02 but so far I've seen outputs
between 360 kHz and 525 Mhz.
Have Fun,
Brooke Clarke
--
w/Java http://www.PRC68.com
w/o Java http://www.pacificsites.com/~brooke/PRC68COM.shtml
http://www.precisionclock.com
John Ackermann N8UR wrote:
>I got my prototype ICS525 "Clock-Block" built this weekend, and had a
>chance to use my friend's HP3048A phase noise system to measure it.
>I've put the results, plus some other info, at
>http://www.febo.com/time-freq/hardware/ICS525/index.html .
>
>The bottom line is that the phase noise isn't great, and is quite
>variable depending on the divider ratios used, but isn't as horrible as
>I thought it might be. It's not going to make a good LO for your
>receiver, but for some other applications it could be perfectly
>acceptable, particularly if you can follow it with some filtering to
>knock down the wide band noise.
>
>John
>
>_______________________________________________
>time-nuts mailing list
>time-nuts at febo.com
>https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>
>
>
More information about the Time-nuts_lists.febo.com
mailing list