[time-nuts] HP-5245L Parts

[Bruce Lanning]

Thanks Allan for the response. I have the HP-5245L and the HP-5262A Time 
Interval Unit, but it is not working. Problems in the PS and the front 
handle on the right side is broken off. I had planned to use this unit for 
frequency comparison, but not sure this is what I want. Your comments would 
be appreciated.
Bruce W1GBS

----- Original Message ----- 
From: "Allan W. Bart, Jr." <allanba at verizon.net>
To: "Discussion of precise time and frequency measurement" 
<time-nuts at febo.com>
Sent: Wednesday, May 24, 2006 2:22 PM
Subject: Re: [time-nuts] HP-5245L Parts


> Hello,
>
> I have one of these units and it will never die, try fair radio in Lima 
> OH.
>
> Allan Bart>
>
>
> From: Bruce Lanning <blanning at acadia.net>
>>Date: Wed May 24 12:55:58 CDT 2006
>>To: time-nuts at febo.com
>>Subject: [time-nuts] HP-5245L Parts
>
>>Looking to buy a HP-5245 or equivalent for parts only. Need not be 
>>working,
>>or complete.
>>If you have this animal and would be willing to part with it, please 
>>contact
>>me directly at: blanning at acadia.net      Thanks,
>>Bruce W1GBS in Maine
>>
>>
>>
>>_______________________________________________
>>time-nuts mailing list
>>time-nuts at febo.com
>>https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>
>
> _______________________________________________
> time-nuts mailing list
> time-nuts at febo.com
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>