[time-nuts] Thunderbolt PSU
David Ackrill
dave.g0dja at tiscali.co.uk
Tue Jul 22 14:20:33 UTC 2008
Oh, for anyone else who has the same PSU as I received, the colours of
the output, from the markings I can see on the PCB, are as follows.
Brown = Ground (Yes, honestly! The brown wire is soldered to the case
in my unit)
Black = 12 Volts (I presume nevative)
Red = +12 Volts
Green = +5 Volts
White = Could not see the markings under some electrolytics. I'll see
if I can get a better look later.
But, I would check for yourselves before connecting up to the Trimble.
As ever, i can't accept responsibility if your unit is wired differently
from mine.
Dave
More information about the Time-nuts_lists.febo.com
mailing list