[time-nuts] PICTIC II Parts - SOIC to PDIP Adaptor
stanley_reynolds at yahoo.com
Sat Jul 10 01:31:13 EDT 2010
No, the ebay item 180460919851 looks correct, data sheet for 74ac175 has the
same pin out for all packages.
Attached a picture pin 1 to pin 1 no crossed pins.
----- Original Message ----
From: Hal Murray <hmurray at megapathdsl.net>
To: Discussion of precise time and frequency measurement <time-nuts at febo.com>
Sent: Fri, July 9, 2010 11:09:18 PM
Subject: Re: [time-nuts] PICTIC II Parts - SOIC to PDIP Adaptor
stanley_reynolds at yahoo.com said:
> The ebay item will fit the .3 inch spacing of the pcb.
Check the pinout. It's turned sideways.
These are my opinions, not necessarily my employer's. I hate spam.
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 21156 bytes
Desc: not available
More information about the time-nuts