[time-nuts] Thunderbolt serial port problem
J. L. Trantham
jltran at att.net
Wed Apr 13 16:48:08 UTC 2011
There are potential failure issues with the TBolt and the monitor. Have you
tried the TBolt with a computer?
I had a TBolt die but would still put out 10 MHz. No serial data and no PPS
though. Have you looked to see if there is 10 MHz and a PPS?
If the issue is the TBolt, make sure the voltages and ground applied to the
connector are actually getting to the board.
Good luck,
Joe
-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com]On
Behalf Of bill
Sent: Wednesday, April 13, 2011 11:13 AM
To: time-nuts
Subject: [time-nuts] Thunderbolt serial port problem
I have a problem with the data out of the thunderbolt serial port. I was
monitoring with
ko4bb monitor and the thunderbolt quit sending data.
I seem to remember some discussion of this on the list some time ago. I
did a
search but didn't find anything.
Any suggestion ? Otherwise I will reverse engineer the serial port and
trouble shoot.
Bill K7NOM
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1209 / Virus Database: 1500/3571 - Release Date: 04/13/11
More information about the Time-nuts_lists.febo.com
mailing list