[time-nuts] semi-OT: comparison of two 10x scope probes / cheap OCXO

[Eric Garner]

I too, fell for the siren song of cheap Chinese probes. 2 years after
I bought 4 of them, only one has not failed. However, my 1980's
vintage probes from Tek still work dandily.



On Thu, Mar 17, 2011 at 12:47 PM, beale <beale at bealecorner.com> wrote:
> Yes, I am controlling the OCXO frequency with a voltage input (center tap of 10k trimpot from +5V to ground). I hooked up my custom 26 MHz PIC divider* and was able to trim the OCXO to match the output of my GPS 1pps signal to better than 1E-9 (at least for short periods of time).
>
> These parts draw about 60 mA at +5V in operation in a 23 C ambient environment, after a brief one-time warmup pulse of about 200 mA. The can gets a bit warm if left open. I taped a small thermistor against the case, and made a little styrofoam box to nest snugly over it and measured the can case temp to reach about 50 C when thus insulated.
>
> I am accumulating some performance data on the two units I have and can post it online if anyone is interested.  (actually, I was thinking of buying a bunch more before posting the data, because the price seems too good to be true).
>
> * http://www.bealecorner.org/best/measure/time/source/
>
> Scott Newell wrote:
>> That's a great price for any OCXO. Do they have EFC? (I can't tell from the part number in the auction photo.)
>
> At 01:41 PM 3/17/2011, beale wrote:
>    output of a 26 MHz Pletronics OCXO in a 14DIP can (by the way these go for $2 online, the cheapest OCXO I've seen).
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>



-- 
--Eric
_________________________________________
Eric Garner