[time-nuts] FE-5680A dumb question...
gonzo .
cadbloke at hotmail.com
Wed Jan 4 07:18:00 UTC 2012
Hi Brian.
Taking the list concensus and confirming it on my recently arrived '5680A, the pinout is as follows:
1. +15V (1500mA cold: 800mA hot)
2. Gnd
3. Rb Lock (lock = low)
4. +5V (~85mA)
5. Gnd
6. 1PPS (high until Rb Lock goes low)
7. 10Mhz
8. RS323-RX
9. RS232-TX
These pinouts are not consistant across the FE-5680A range, but seems good for the 'current batch' of cheap units coming out of china.
Cheers,
ian
> Date: Tue, 3 Jan 2012 20:58:10 -0500
> From: "Brian, WA1ZMS" <wa1zms at att.net>
> To: "Time-Nuts" <time-nuts at febo.com>
> Subject: [time-nuts] FE-5680A dumb question...
> Message-ID: <000001ccca84$4ff2d570$efd88050$@att.net>
> Content-Type: text/plain; charset="us-ascii"
>
> My E-bay FE-5680A finally arrived. (4weeks later)
>
>
>
> Of the pins on the DB-9 connector, which one is the RF output?
>
> The manual only talks about an SMA output.
>
>
>
> I know this has been talked about before, but I cannot find the thread.
>
>
>
> Thanks in advance & sorry for bandwidth,
>
> -Brian, WA1ZMS
More information about the Time-nuts_lists.febo.com
mailing list